Protocol Citation: Andrew Routh, Elizabeth Jaworski, ClickSeq Technologies 2026. X-ClickSeq: Custom-Primed Protocol with Dual Indexing using ClickSeq Kit. protocols.io https://dx.doi.org/10.17504/protocols.io.261geyqj7v47/v1
Manuscript citation:
Citation
Jaworski E, Langsjoen RM, Mitchell B, Judy B, Newman P, Plante JA, Plante KS, Miller AL, Zhou Y, Swetnam D, Sotcheff S, Morris V, Saada N, Machado RR, McConnell A, Widen SG, Thompson J, Dong J, Ren P, Pyles RB, Ksiazek TG, Menachery VD, Weaver SC, Routh AL (2021). Tiled-ClickSeq for targeted sequencing of complete coronavirus genomes with simultaneous capture of RNA recombination and minority variants.
Routh A, Head SR, Ordoukhanian P, Johnson JE (2015). ClickSeq: Fragmentation-Free Next-Generation Sequencing via Click Ligation of Adaptors to Stochastically Terminated 3'-Azido cDNAs.
License: This is an open access protocol distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Protocol status: Working
We use this protocol and it's working
Created: May 21, 2026
Last Modified: May 21, 2026
Protocol Integer ID: 317730
Keywords: ClickSeq, Click Chemistry, RNAseq, DNAseq, NGS, Illumina, fragmentation-free, recombination, sequencing cdna library, standard rna ngs protocol, many advantages over standard rna ngs protocol, clickseq kit, clickseq kit clickseq, using clickseq kit clickseq, next generation sequencing, same reagents as the clickseq kit, rnaseq, identical to clickseq, clickseq, sequencing ready library, modified nucleotide, generation sequencing, sequencing adaptor, reverse transcription step, nucleotide, sequencing adapter, rna, transcription reaction, nucleic acid, dna template, modular platform for ngs library synthesis, ngs library synthesis, cdna fragment, cdna library, common rna, time from rna, yielding cdna fragment, common ligation enzyme, blocked cdna fragment, click, own rt primer as per the requirement, nascent cdna, place of common ligation enzyme, own rt primer, 9n random primer, used enzymatic reaction, enzymatic reaction, problematic step in the synthesis, terminating azido, version of the clickseq kit, adaptor during
Disclaimer
ClickSeq‱ is a pending trademark of ClickSeq Technologies, LLC.
Abstract
ClickSeq is a simple, fragmentation-free method for the synthesis of Next-Generation Sequencing (NGS) libraries. ClickSeq derives its name by using ‘Click-Chemistry‘ in the place of common ligation enzymes to ‘click-ligate’ nucleic acids to sequencing adaptors – an essential and often problematic step in the synthesis of Next-Generation Sequencing cDNA libraries. The process takes advantage of the chain-terminating properties of 3′-azido-nucleotides, which are included in the initial in vitro reverse-transcription reactions uniformly required for RNAseq. The modified nucleotides are stochastically incorporated into the nascent cDNA, yielding cDNA fragments blocked at their 3′ ends with azido groups. The 3′-azido-blocked cDNA fragments are ‘click-ligated’ onto alkyne-functionalized sequencing adaptors, which can subsequently be PCR-amplified to yield a sequencing-ready NGS library.
ClickSeq is a highly flexible and modular platform for NGS library synthesis where both RNA and DNA templates can be used as input material. ClickSeq offers many advantages over standard RNA NGS protocols as click-chemistry is used to attach the required sequencing adapter, rather than commonly used enzymatic reactions. Overall, this results in increased efficiency of the protocol, fewer processing steps, and reduced time from RNA to sequencing ready libraries. Additionally, since there are no fragmentation steps typically required in common RNA-seq approaches and because in vitro template switching during RT is limited by the chain terminating azido-nucleotides, ClickSeq offers the benefit of ultra-low artifactual chimera rate, with only 3 chimeric events per million reads.
X-ClickSeq kits provide the same reagents as the ClickSeq kits, except that no primers are provided for the Reverse Transcription step. Rather, the user may use their own RT primer as per the requirements of their own assay. For example, a 9N random primer might be used instead of a 6N random primer; or a set of SARS-CoV-2 targeting tiled-primers might be used (see Jaworski et al. eLife, 2021). All other aspects of the library prep are otherwise identical to ClickSeq. The data analysis pipeline will also be altered as per the assay design.
This “Dual Indexing” version of the ClickSeq kit uses a partial p5 Click-Adaptor during the click-ligation step (in place of the full i5 adaptor in the single-indexed version of the kit), that is compatible with indexed i5-primers in the final PCR step (in place of the “UP_S” primer used in the single-indexed version of the kit). The indexed i7-primers used in the dual-indexed kit are the same as those used for the single-indexed version of the kit.
Guidelines
Next-Generation Sequencing (NGS) is a highly sensitive technique that generates millions of data points. The quality of your input material can be translated to the final quality of your libraries at the end of
this protocol, and in turn, the sequencing data. Use common sense laboratory precautions to minimize introducing contamination to your samples and follow procedures as written to ensure good yields.
RT-Primer Design
The X-ClickSeq kits purposefully omit any primer in the x-Primer Mix (xPM) used in the reverse transcription step. This allows users to provide their own bespoke primer(s), as per the needs of their specific project. To be compatible with the downstream reagents and oligos, these RT primers must contain first a partial i7 sequence, followed by the template-annealing region. For example, the random/6N primer included in the standard ClickSeq kit is:
GTGACTGGAGTTCAGACGTGTGCTCTTCCGATCTNNNNNN
Thus, the user can substitute the ‘NNNNNN’ region with any sequence of interest, and/or provide many template-specific/tiled primers. The user-provided primer(s) are added to the reaction at step 3.
As a result, the X-ClickSeq kit provides users with the flexibility to design their own ClickSeq-based assays.
The user-provided primer(s) must be resuspended in either nuclease-free water or Tris-buffer, but must not contain EDTA or other chelators.
The user-provided primer(s) should be between 10-100µM, or can be optimized on a per-sample or application-specific basis. Template-specific or Tiled primers should generally not exceed 10µM, but must be validated on a case-by-case basis.
RNA Handling
Work in an RNase-free environment; use RNase inhibitors to decontaminate your workspace. Follow standard aseptic techniques.
Wear PPE (gloves, lab coat, etc) to protect your workstation and reagents from RNases that are present on your skin. Change gloves often.
Use RNase-free plasticware by purchasing certified materials or by treating consumables with RNase Inhibitors.
RNA Input Guidelines
Most standard RNA extraction protocols are compatible with this method. Take care during the final steps of the extraction method to ensure that no salts, metal ions, or organic solvents are carried over into the final elution step. For example, ethanol contamination can reduce the efficiency of all reactions in this protocol.
During the RNA extraction elute your sample in RNase-free water or Tris buffer (10mM, pH 7.4). We recommend you do NOT use carrier RNA during the extraction process. These will negatively impact your final sequencing data as the carrier RNA will also be sequenced.
When using ClickSeq for RNAseq applications, we recommend using protocols that do not co-purify genomic DNA, since this may also provide a substrate for the RT reaction. If available, complete the specified DNase I treatment during RNA extraction.
The random primer of this ClickSeq kit will generate cDNA fragments off any nucleic acid in your sample. WHAT YOU PUT IN THE INTIAL REACTION (Step #1) IS WHAT YOU WILL SEQUENCE. Make sure to purify your samples prior to starting this protocol (i.e. rRNA deplete, polyA-select, or another purification method that suits your needs).
RNA can be quantified by any of the user’s preferred methods (UV-vis, spectrophotometer, Qubit fluorometer, etc.)
This protocol has been demonstrated to work with as little as 10ng up to 4µg of RNA. That quantity should be in a max of 10µl water or Tris- buffer. While it is possible to use the specified range of starting material, we have found that the optimal amount to start with is generally >100ng of RNA. Below this value, additional PCR cycles are required that will result in PCR duplication and increased adaptor-dimers in the final library.
A260/A280 values should be between 1.9 and 2.2
RIN values should be >6.0
Bead Handling
Follow manufacturers recommendations but generally, SPRI purification beads should be stored at +4°C. Beads tend to settle during storage so they should be resuspended thoroughly before use (by vortexing or pipetting vigorously). Beads are resuspended properly when the solution is uniform in color (light brown) and there are no visible clumps on the bottom or sides of the tube.
SPRI beads are magnetic and are collected by placing the sample tube on a magnetic rack. The time it takes for the beads to pellet will depend on the strength of the magnet you are using; adjust the incubation time accordingly by waiting until the solution is completely clear. Waiting longer to ensure that all the beads have pelleted will not affect overall quality of your libraries but will ensure adequate efficiency of the purification steps.
When discarding the supernatant of pelleted beads, take care to not disturb the beads by keeping the sample tube on the magnetic rack and do not touch the pellet with a pipette tip.
Ethanol carryover after the second wash step during bead purification can inhibit subsequent reactions. Visually inspect each well to ensure all ethanol has been removed.
Do not allow beads to over-dry, exhibited by visible cracking. This can damage the beads and reduce overall yields.
General
Read an entire section of the protocol before beginning to familiarize yourself with all steps. To minimize any issues, collect the necessary equipment, prepare the appropriate reagents, and pre-load the appropriate incubation temperatures on your thermocycler.
Enzymes should be thawed and kept on ice while in use. All other reagents can be thawed at room temperature and kept on ice while not in use. SPRI beads equilibrate to room temperature prior to use.
Spin down all reagent tubes prior to opening to prevent loss and to minimize cross-contamination.
Use calibrated pipettes and fresh tips between samples and reagents.
Pipette reagents and mixes carefully and in a controlled manner. Viscous reagents (such as enzyme mixes) should be pipetted slowly to ensure accuracy and the complete transfer of the reagent. Avoid frothing and the introduction of air bubbles while mixing.
Master Mixes
Steps #5 and #17 require the generation of master mixes. In order to have enough solution for
all samples, include a 10% surplus per reaction when calculating the master mix.
PCR Cycle Optimization
The number of PCR cycles to perform will depend on the sample type (species, tissue, quality, etc.) so optimizations should be completed prior to processing all samples of the same type. This protocol has been extensively tested using total cellular RNA extracted from D. melanogaster (S2) cells. The provided values should be used as a reference only.
Total RNA Input
PCR Cycle Number
20ng
18-21
50ng
17-20
100ng
16-19
250ng
12-18
Sequencing Guidelines
Final ClickSeq libraries are compatible with the Illumina sequencing platforms (NextSeq, NovaSeq, MiSeq, HiSeq, etc.) or with Element Biosciences Aviti™ systems/flowcells that are compatible with the same Illumina adaptors.
Final ClickSeq libraries can also be sequenced on Oxford Nanopore Technology's flowcell by straight-forward ligation of the ONT DNA sequencing (e.g. LSK109) adaptors.
Read 1 will include 4nt of the UMI followed by the cDNA fragment.
The 8nt i7 and i5 index sequences are provided in the associated index primer kit are shown table below.
A
B
C
D
i7 Index
Sequence
i5 Index
Sequence
D701
ATTACTCG
D501
CAATTAAC
D702
TCCGGAGA
D502
TGGCCGGT
D703
CGCTCATT
D503
AGTACTCC
D704
GAGATTCC
D504
GACGTCTT
D705
ATTCAGAA
D505
TGCGAGAC
D706
GAATTCGT
D506
CATAGAGT
D707
CTGAAGCT
D507
ACAGGCGC
D708
TAATGCGC
D508
GTGAATAT
D709
CGGCTATG
D509
AACTGTAG
D710
TCCGCGAA
D510
GGTCACGA
D711
TCTCGCGC
D511
CTGCTTCC
D712
AGCGATAG
D512
TCATCCTT
Materials
Required Reagents
X-ClickSeq Library Prep Kit with dual indexingbaseclickCatalog #BCK-X-RNAseqDual
ClickSeq Library Prep Kit Dual Index PrimersbaseclickCatalog #BCK-RNAseq-IP_Dual
SuperScript™ III Reverse TranscriptaseThermo FisherCatalog #18080093
OneTaq 2X Master Mix with Standard Buffer - 100 rxnsNew England BiolabsCatalog #M0482S
SPRIselect reagent kitBeckman CoulterCatalog #B23317 or equivalent DNA/RNA Purification Beads
User-provided primer(s) used in the Reverse-Transcription step.
X-ClickSeq Library Prep Kit with dual indexingbaseclickCatalog #BCK-X-RNAseqDual
ClickSeq Library Prep Kit Dual Index PrimersbaseclickCatalog #BCK-RNAseq-IP_Dual
SuperScript™ III Reverse TranscriptaseThermo FisherCatalog #18080093
Safety warnings
Standard molecular lab precautions should be adhered to, including standard PPE (gloves, lab coat, eye protection, etc).
Before start
Check to ensure that you have all the necessary components, materials, and equipment before beginning this protocol. The protocol can be grouped into 6 broad steps/sections:
Reverse Transcription and RNA Removal: RNA is reverse transcribed by user-provided primer(s) with a partial p7 Illumina adaptor sequence. The presence of AzNTPs stochastically terminates cDNA chain extension generating a distribution of randomly sized cDNA fragments.
First Bead Purification: Magnetic beads are used to remove all components of the reverse transcription reaction leaving the cDNA fragments for further processing.
Click-Ligation: During this step, a sequencing adapter is attached to the azido-terminated 3’ ends of the cDNA fragments using a Click-Chemistry reaction.
Second Bead Purification: SPRI beads are used to remove components of the click-ligation reaction leaving cDNA fragments that are flanked by sequencing adapters.
PCR Library Amplification: At this step, PCR is used to convert the single stranded cDNA fragments to dsDNA fragments, amplify the fragments to generate enough material for sequencing, and to add the sequencing indices/barcodes (Illumina i7/i5 adapters).
Final Bead Purification: Magnetic bead purification is used to remove all components of the PCR amplification reaction from the completed barcoded libraries.
Reverse Transcription and RNA Removal
50m
In a 0.2ml tube, dilute 100 ng-1 µg of input RNA to 10 µL using nuclease free water.
Note
The ClickSeq protocol has been demonstrated to work with as little as 10ng up to 4µg of RNA, but will vary depending upon the nature of the target of the custom primers provided in step #3. That quantity should be in a max of 10µl water or Tris-buffer. While it is possible to use the specified range of starting material, we have found that the optimal amount to start with is generally >100ng of RNA. Below this value, additional PCR cycles are required that will result in PCR duplication and increased adaptor-dimers in the final library.
Add 2 µL of x-Primer Mix (xPM) to the diluted RNA. Mix well.
Add 1 µL of user-provided primer(s) to the diluted RNA. Mix well.
Note
The X-ClickSeq kits purposefully omit any primer in the x-Primer Mix (xPM) used in the reverse transcription step. This allows users to provide their own bespoke primer(s), as per the needs of their specific project. To be compatible with the downstream reagents and oligos, these RT primers must contain first a partial i7 sequence, followed by the template-annealing region. For example, the random/6N primer included in the standard ClickSeq kit is:
GTGACTGGAGTTCAGACGTGTGCTCTTCCGATCTNNNNNN
Thus, the user can substitute the ‘NNNNNN’ region with any sequence of interest, and/or provide many template-specific/tiled primers. The user-provided primer(s) are added to the reaction at step 3. As a result, the X-ClickSeq kit provides users with the flexibility to design their own ClickSeq-based assays.
The user-provided primer(s) must be resuspended in either nuclease-free water or Tris-buffer, but must not contain EDTA or other chelators.
The user-provided primer(s) should be between 10-100µM, or can be optimized on a per-sample or application-specific basis. Template-specific or Tiled primers should generally not exceed 10µM, but must be validated on a case-by-case basis.
Incubate the mixture at 65 °C for 00:05:00 to melt any RNA secondary structure and immediately snap cool the reaction by placing the tubes on ice for 00:01:00 to anneal the reverse primer.
6m
After snap cooling, generate an RT master mix in a separate tube by combining the following components, pipette well to mix:
Generate a Master Mix of these components when preparing more than one sample at a time
Note
Recombinant Ribonuclease Inhibitor is not essential in cases where RNA quality or abundance is not a concern and can be replaced with nuclease-free water to save on reagent costs
Add 7 µL of the RT master mix to each reaction and pipette to mix.
Incubate the reaction in a thermocycler using the following conditions:
25 °C for 00:10:00
50 °C for 00:10:00
75 °C for 00:10:00
4 °C for ∞
Note
At this point it is recommended to remove the SPRI Bead reagents from 4°C storage to allow them to equilibrate to room temperature.
30m
[optional] To remove template RNA, add 0.5 µL of RNase H - 250 unitsNew England BiolabsCatalog #M0297S. Pipette to mix. Incubate the reaction in a thermocycler using the following conditions:
37 °C for 00:20:00
80 °Cfor 00:10:00
4 °C for ∞
Note
Removal of the RNA template using RNaseH is not essential but may improve library yield in some cases. In cases where library yield is not a concern, step #7 may be omitted to save on reagent costs and prep time.
30m
First Bead Purification
15m
Add 36 µL of thoroughly resuspended SPRIselect reagent kitBeckman CoulterCatalog #B23317 beads to the reaction mix. Mix well by pipetting. Incubate for 00:05:00 at Room temperature.
Note
SPRI beads tend to settle during storage and should bethoroughly resuspended by vortexing briefly prior to use. Additionally, it is important to allow the SPRI beads to equilibrate to room temperature for 30 min.
5m
Pellet beads by placing the sample tubes on a magnetic rack. Allow the beads to collect for 00:05:00 or until the supernatant is completely clear.
5m
Leaving the sample tubes on the magnetic rack, discard clear supernatant taking care to not disturb the pelleted beads.
Leaving the sample tubes on the magnetic rack, wash pelleted beads by adding 200 µLof freshly prepared 80% EtOH. Do not resuspend beads. After 00:00:30 incubation remove and discard the supernatant.
30s
Repeat the EtOH washing step (#12) for a total of two washes. After the second wash make sure to remove all traces of EtOH as ethanol can impair the efficiency of subsequent steps. Visually inspect tubes for trace amounts of EtOH left over on the sides of the tubes. Tubes should be removed off the magnet and pulse spun to collect extra EtOH at the bottom of the sample tube. Place tubes back on a magnetic stand and pipette off any remaining EtOH.
Remove the sample tubes from the magnetic rack and resuspend the beads by adding 21 µL of Elution Buffer 1 (EB1).Incubate resuspended beads for 00:02:00 at Room temperature
2m
Place the sample tubes back on the magnetic rack and allow beads to pellet. Transfer 20 µL of the supernatant to a fresh 0.2ml sample tube.
Safe stopping point: samples can be stored at -20 °C
Click-Ligation
20m
Add 15 µL of Click Mix (CM) to each sample. Pipette to mix, taking care to not introduce air bubbles.
Note
The Click-Adaptor present in the Click Mix (CM) is:
5’ Hexynyl-NNNNAGATCGGAAGAGCGTCGTGTAGGGAAAGAGTGT
In a separate tube, prepare the Click Ligation master mix, pipetting up and down 3-5 times to mix, taking care to not introduce any air bubbles. CC is blue in color and should turn clear/colorless when mixed properly. This is a time sensitive reaction so proceed immediately to the next step.
A
B
C
Per Rxn
Master Mix
Click Accelerant (CA)
4µl
Click Catalyst (CC)
1µl
Generate a Master Mix of these components when preparing more than one sample at a time
Note
The tube containing CA should only be used one time to limit exposure to atmospheric oxygen. Discard the tube once it has been used. The ClickSeq kit provides two CA tubes.
Add 5 µL of the Click Ligation master mix to each sample tube. Once the mix has been added to all sample tubes, pipette or flick to mix, and spin down contents of the tube. Incubate the reaction at room temperature for 00:15:00.
15m
Second Bead Purification
15m
Add 64 µL of thoroughly resuspended SPRIselect reagent kitBeckman CoulterCatalog #B23317beadsto the reaction mix. Mix well by pipetting. Incubate for 00:05:00 at Room temperature
5m
Pellet beads by placing the sample tubes on a magnetic rack. Allow the beads to collect for 00:05:00or until the supernatant is completely clear.
5m
Leaving the sample tubes on the magnetic rack, discard clear supernatant. Take care to not disturb the pelleted beads.
Leaving the sample tubes on the magnetic rack, wash pelleted beads by adding 200 µL of freshly prepared 80% EtOH. Do not resuspend beads. After 00:00:30 incubation remove and discard the supernatant.
30s
Repeat the EtOH wash step (#22) for a total of two washes. After the second wash make sure to remove all traces of EtOH as ethanol can impair the efficiency of subsequent steps. Visually inspect tubes for trace amounts of EtOH left over on the sides of the tubes. Tubes should be removed off the magnet and pulse spun to collect extra EtOH at the bottom of the tube. Place tubes back on a magnetic stand and pipette off any remaining EtOH.
Remove the sample tubes off the magnetic rack and resuspend the beads by adding 21 µLof Elution Buffer 2 (EB2).Incubate resuspended beads for 00:02:00 at Room temperature.
2m
Place the sample tubes back on the magnetic plate and allow beads to pellet. Transfer 20 µL of the supernatant to a fresh 0.2ml PCR tube.
Safe stopping point: samples can be stored at -20 °C overnight
PCR Library Amplification
2h 10m
Transfer 10 µL of the sample volume to a new PCR tube.
(Note: Retain the other 10µl of your sample. It can be used to repeat the PCR amplification step in the case of over- or under-cycling or for technical replicates).
Add 25 µL of OneTaq 2X Master Mix with Standard Buffer - 100 rxnsNew England BiolabsCatalog #M0482S to each sample tube.
Using a unique pair of Indexing Primers per sample, add 7.5 µLl of each respective i7 index primer (Index Primer D701-D712) and 7.5 µL of each respective i5 index primer (Index Primer D501-D512) to each sample tube. Pipette to mix. Take note of which indexes were used for each sample.
'xxxxxx' denotes the 8nt barcode used. Any indexing primers that conform to this 'structure' can be used here. The 8nt i7 and i5 index sequences are provided in the tables below:
A
B
C
D
D701
ATTACTCG
D501
CAATTAAC
D702
TCCGGAGA
D502
TGGCCGGT
D703
CGCTCATT
D503
AGTACTCC
D704
GAGATTCC
D504
GACGTCTT
D705
ATTCAGAA
D505
TGCGAGAC
D706
GAATTCGT
D506
CATAGAGT
D707
CTGAAGCT
D507
ACAGGCGC
D708
TAATGCGC
D508
GTGAATAT
D709
CGGCTATG
D509
AACTGTAG
D710
TCCGCGAA
D510
GGTCACGA
D711
TCTCGCGC
D511
CTGCTTCC
D712
AGCGATAG
D512
TCATCCTT
i7 and i5 Indexes included in the Dual-Indexing Primer Box (12 x12 Indexes for maximum of 144 unique combinations).
Place the sample tubes in a thermocycler using the following PCR cycling program:
94 °C00:01:00; 53 °C00:00:30; 68 °C00:10:00;
[94 °C00:00:30; 53 °C00:00:30; 68 °C00:02:00] x 12-21 cycles;
68 °C00:05:00;
4 °C f∞
Note
The number of PCR cycles to perform will depend on the sample type (species, tissue, quality, etc.) so optimizations should be completed prior to processing all samples of the same type. This protocol has been extensively tested using total cellular RNA extracted from D. melanogaster (S2) cells. The provided values should be used as a reference only. We recommended starting with 18 cycles when generating libraries from >100ng of high quality RNA and adjusting as needed.
A
B
Total RNA Input
PCR Cycle Number
20ng
18-21
50ng
17-20
100ng
16-19
250ng
12-18
Suggested PCR cycle numbers depending upon the amount of RNA provided in Step #1.
Note
In the case of over- or under-cycling, starting at step #26, the protocol may be repeated using the retained 10µl of your sample from step #25. Under-cycling will result in low yield and the PCR amplification should be repeated with a higher cycle number. Over-cycling can result in excessive PCR duplication and will result in excess library.
19m 30s
Final Bead Purification
15m
Add 30 µL of thoroughly resuspended SPRIselect reagent kitBeckman CoulterCatalog #B23317 to the reaction mix. Mix well by pipetting. Incubate for 5 min at room temperature.
SPRIselect reagent kitBeckman CoulterCatalog #B23317 Pellet beads by placing the sample tubes on a magnetic rack. Allow the beads to collect for 00:05:00 or until the supernatant is completely clear.
5m
Leaving the sample tubes on the magnetic rack, transfer the supernatant to fresh 0.2ml tubes. Take care to not disturb the pelleted beads. Pelleted beads may be discarded. Do NOT discard the supernatant.
Note
The SPRI beads discarded at this step retain the longer fragment sizes in the final library generated by ClickSeq (>~600nt). These are generally not compatible with clustering on Illumina flowcells, however, these beads/fragments can be washed with 80% EtOH per the usual protocol, eluted with EB2 and retained for sequencing on longer-read NGS platforms such as Oxford Nanopore Technologies flowcells.
Add 15 µL of thoroughly resuspended SPRI beadsto the retained supernatant from step #32. Mix well by pipetting. Incubate for 00:05:00 at Room temperature.
5m
Pellet beads by placing the sample tubes on a magnetic rack. Allow the beads to collect for 00:05:00 or until the supernatant is completely clear.
5m
Leaving the sample tubes on the magnetic rack, discard clear supernatant. Take care to not disturb the pelleted beads.
Leaving the sample tubes on the magnetic rack, wash pelleted beads by adding 200 µL of freshly prepared 80% EtOH. Do not resuspend beads. After 00:00:30 incubation remove and discard the supernatant.
30s
Repeat the EtOH wash step (#36) for a total of two washes. After the second wash make sure to remove all traces of EtOH as ethanol can impair the efficiency of subsequent steps. Visually inspect tubes for trace amounts of EtOH left over on the sides of the tubes. Tubes should be removed off the magnet and pulse spun to collect extra EtOH at the bottom of the tube. Place tubes back on a magnetic stand and pipette off any remaining EtOH.
Remove the sample tubes off the magnetic rack and resuspend the beads by adding 18 µL of Elution Buffer 2 (EB2).Incubate resuspended beads for 00:02:00 at Room temperature.
2m
Place the sample tubes back on the magnetic plate and allow beads to pellet. Transfer 17 µL of the supernatant to a fresh tube.
Samples are now ready for quality control, quantification, pooling, and sequencing.
Safe stopping point: samples can be stored at -20 °C
Note
Following the protocol as directed will retain fragments ~300-600bp. This is the optimal size fragment size range for the ClickSeq protocol. The final fragments consist of: ~140nt of sequencing adapters and ~160-460nt of the cDNA fragment. If a tighter size selection is required, we suggest following the additional optional steps protocol.
[Optional] Agarose Gel DNA Extraction Protocol (if tighter fragment size distribution is required)
Quantify samples using the Qubit dsDNA High Sensitivity Kit or with a BioAnalyzer High Sensitivity DNA kit.
Make an equimolar pool(s) of your samples (or however you would like to distribute the pool). You may pool all your samples into one pool, or you may make a few pools with fewer samples per pool. When pooling, consider the capacity of your gel electrophoresis system.
Following the protocol for the agarose system of your choosing; assemble your gel electrophoresis system, mix your sample with loading dye (if necessary), load your samples and ladder into the wells of your gel, and run the gel to separate your samples.
Using a clean gel knife and referencing the DNA ladder, excise the gel between 300 and 600bp (or as required per the user’s assay).
Following the user defined agarose DNA extraction protocol, dissolve and extract the DNA from the excised agarose. Elute/resuspend your sample in 10-20µl of Elution Buffer 2 (EB2).
Samples are now ready for quality control, quantification, pooling, and sequencing.
Safe stopping point: samples can be stored at -20 °C
Protocol references
Citation
Morgan AL, Vu MN, Zhou Y, Lokugamage KG, Meyers WM, Alvarado RE, Ahearn Y, Estes LK, Plante JA, Johnson BA, Suthar MS, Walker DH, Plante KS, Menachery VD (2025). The furin cleavage site is required for pathogenesis, but not transmission, of SARS-CoV-2. Journal of virology.
Lokugamage KG, Zhou Y, Alvarado RE, Plante JA, Ahearn Y, Chen J, Estes L, Meyers W, Nilsson J, Routh AL, Walker DH, Menachery VD, Johnson BA (2025). Convergent evolution in nucleocapsid facilitated SARS-CoV-2 adaptation for human infection. Journal of virology.
Vu MN, Lokugamage KG, Plante JA, Scharton D, Bailey AO, Sotcheff S, Swetnam DM, Johnson BA, Schindewolf C, Alvarado RE, Crocquet-Valdes PA, Debbink K, Weaver SC, Walker DH, Russell WK, Routh AL, Plante KS, Menachery VD (2022). QTQTN motif upstream of the furin-cleavage site plays a key role in SARS-CoV-2 infection and pathogenesis.
Johnson BA, Xie X, Bailey AL, Kalveram B, Lokugamage KG, Muruato A, Zou J, Zhang X, Juelich T, Smith JK, Zhang L, Bopp N, Schindewolf C, Vu M, Vanderheiden A, Winkler ES, Swetnam D, Plante JA, Aguilar P, Plante KS, Popov V, Lee B, Weaver SC, Suthar MS, Routh AL, Ren P, Ku Z, An Z, Debbink K, Diamond MS, Shi PY, Freiberg AN, Menachery VD (2021). Loss of furin cleavage site attenuates SARS-CoV-2 pathogenesis.
Routh A, Head SR, Ordoukhanian P, Johnson JE (2015). ClickSeq: Fragmentation-Free Next-Generation Sequencing via Click Ligation of Adaptors to Stochastically Terminated 3-Azido cDNAs.
Morgan AL, Vu MN, Zhou Y, Lokugamage KG, Meyers WM, Alvarado RE, Ahearn Y, Estes LK, Plante JA, Johnson BA, Suthar MS, Walker DH, Plante KS, Menachery VD. The furin cleavage site is required for pathogenesis, but not transmission, of SARS-CoV-2.
Lokugamage KG, Zhou Y, Alvarado RE, Plante JA, Ahearn Y, Chen J, Estes L, Meyers W, Nilsson J, Routh AL, Walker DH, Menachery VD, Johnson BA. Convergent evolution in nucleocapsid facilitated SARS-CoV-2 adaptation for human infection.
Vu MN, Lokugamage KG, Plante JA, Scharton D, Bailey AO, Sotcheff S, Swetnam DM, Johnson BA, Schindewolf C, Alvarado RE, Crocquet-Valdes PA, Debbink K, Weaver SC, Walker DH, Russell WK, Routh AL, Plante KS, Menachery VD. QTQTN motif upstream of the furin-cleavage site plays a key role in SARS-CoV-2 infection and pathogenesis.
Johnson BA, Xie X, Bailey AL, Kalveram B, Lokugamage KG, Muruato A, Zou J, Zhang X, Juelich T, Smith JK, Zhang L, Bopp N, Schindewolf C, Vu M, Vanderheiden A, Winkler ES, Swetnam D, Plante JA, Aguilar P, Plante KS, Popov V, Lee B, Weaver SC, Suthar MS, Routh AL, Ren P, Ku Z, An Z, Debbink K, Diamond MS, Shi PY, Freiberg AN, Menachery VD. Loss of furin cleavage site attenuates SARS-CoV-2 pathogenesis.
Routh A, Head SR, Ordoukhanian P, Johnson JE. ClickSeq: Fragmentation-Free Next-Generation Sequencing via Click Ligation of Adaptors to Stochastically Terminated 3-Azido cDNAs.
