Feb 13, 2023
Preparing Combined Indexed Primer Plates (IDT Ultramers) for the Illumina MiSeq - IDT UDIs
- André Comeau1,
- Alessi Kwawukume1
- 1Integrated Microbiome Resource (IMR), Dalhousie University
- Integrated Microbiome Resource (IMR)
Protocol Citation: André Comeau, Alessi Kwawukume 2023. Preparing Combined Indexed Primer Plates (IDT Ultramers) for the Illumina MiSeq - IDT UDIs. protocols.io https://dx.doi.org/10.17504/protocols.io.6qpvr63wbvmk/v1
License: This is an open access protocol distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Protocol status: Working
We use this protocol and it's working
Created: March 07, 2022
Last Modified: February 13, 2023
Protocol Integer ID: 59158
Keywords: Illumina, primers, unique dual index, idt working primer stocks of illumina udi primer, illumina udi primer, idt working primer stock, idt ultramer, idt udis the preparation, preparing combined indexed primer plate, combined indexed primer plate, indexed primer plate, use in imr pcr prep, imr pcr prep, idt udi, primer, illumina miseq, pcr, illumina, preparation
Abstract
The preparation of diluted combined (F+R) IDT working primer stocks of Illumina UDI primers for use in IMR PCR preps.
Materials
The following materials list contains those consumables used specifically at the IMR to complete the present protocol.
IDT stock primer DWP
Eppendorf (or similar) DWPs
Microplates sealing film Bio-Rad
Tips ClipTip 20
Tips ClipTip 300
UltraPure water
Reservoirs
Troubleshooting
Order Primers
Use our Excel template (
Illumina-IDT-UDI-8bp-customfusionprimers-template.xlsx ) to copy existing 16S/18S/ITS primers or to design your own custom gene primers with the proper Illumina indices and Nextera adapter orientations. We order IDT “Ultramers” for such long primers (~80-90 nt) as their coupling efficiency is one of the highest available (critical for obtaining high proportions of full-length oligos in the mix you obtain). Order the fusion primers at 4 nanomolar (nM) scale in deep-well plates (DWP); there will be 4 x 96-well plates, with one unique Forward primer + one unique Reverse primer combined in each well, arranged as follows:
Illumina-IDT-UDI-8bp-customfusionprimers-template.xlsx ) to copy existing 16S/18S/ITS primers or to design your own custom gene primers with the proper Illumina indices and Nextera adapter orientations. We order IDT “Ultramers” for such long primers (~80-90 nt) as their coupling efficiency is one of the highest available (critical for obtaining high proportions of full-length oligos in the mix you obtain). Order the fusion primers at 4 nanomolar (nM) scale in deep-well plates (DWP); there will be 4 x 96-well plates, with one unique Forward primer + one unique Reverse primer combined in each well, arranged as follows:F1R1 Plate (P1) = UDIs 1-96 (ie: i5_1+i7_1 in well A1, i5_2+i7_2 in well A2, etc.)
F1R2 Plate (P2) = UDIs 97-192
F2R1 Plate (P3) = UDIs 193-288
F2R2 Plate (P4) = UDIs 289-384
Prepare Archival Stocks
Once arrived, do a short spin of the plate in case lyophilized material was dislodged, then add 400 µL of PCR-grade water to each well of each plate containing the primers in order to reconstitute them at a concentration of 10 micromolar (µM) (1/10th the typical 100 µM working stock concentration for primers). Mix well by pipetting up and down at least 3 times and seal the plate with Bio-Rad film. Alternatively, the plate is sealed with Bio-Rad film and mixed well by vortexing it on a benchtop vortex for 00:00:30 and then doing a short spin at approx. 500 rpm, 00:00:30 . We have found that these primers usually need a significant incubation time for the lyophilized pellets to re-suspend well – we typically leave them overnight at 4 °C before continuing.
1m
Prepare Combined Working Stocks
Prepare the combined 1 micromolar (µM) working stock F1R1 Primer Plate by pipetting 228 µL of PCR-grade water into each well of an empty 96-well DWP from a sterile reservoir. Working by column and changing tips each time, transfer 12 µL of reconstituted F1R1 stock primer into each well of each column, mixing well by pipetting. Once complete, the resulting plate will have enough primer for 30 PCR plates (8 µL combined F+R per rxn × 30 = 240 µL). Seal the plate with PCR film and store at -20 °C .
Prepare the combined 1 micromolar (µM) working stock F1R2 Primer Plate by repeating Step 3, but using the above reconstituted F1R2 stock deep-well primer plate.
Prepare the combined 1 micromolar (µM) working stock F2R1 Primer Plate by repeating Step 3, but using the above reconstituted F2R1 stock deep-well primer plate.
Prepare the combined 1 micromolar (µM) working stock F2R2 Primer Plate by repeating Step 3, but using the above reconstituted F2R2 stock deep-well primer plate.
Once all aliquoting is complete, seal the DWPs with PCR film and archive at -20 °C until new aliquots are required (minimized freeze-thaw cycles).
(Optional) Prepare Blocking Primer Stocks
Optional: For the generation of 18S V4 amplicons from microbiome samples containing substantial non-target host DNA (ex: human, mouse, etc.), order (ex: from PNA Bio) a custom PNA mammalian blocking primer (elongation arrest in the V4 region) with the sequence: 5’-TCTTAATCATGGCCTCAGTT-3’ (courtesy of Laura Parfrey and Matt Lemay, UBC). Once arrived, prepare an archival stock of 100 micromolar (µM) and a working stock of 10 micromolar (µM) using PCR-grade water.