Jan 18, 2024
Preparation of Recording ACSF (artificial cerebrospinal fluid) for slice electrophysiology
- 1University of California San Diego
Protocol Citation: Sarthak M. Singhal, Thomas S. Hnasko 2024. Preparation of Recording ACSF (artificial cerebrospinal fluid) for slice electrophysiology. protocols.io https://dx.doi.org/10.17504/protocols.io.x54v9p4nmg3e/v1
License: This is an open access protocol distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Protocol status: Working
We use this protocol and it's working
Created: January 18, 2024
Last Modified: January 18, 2024
Protocol Integer ID: 93770
Keywords: recording acsf recording acsf, recording acsf, electrophysiological recording, artificial cerebrospinal fluid, slice electrophysiology, incubating brain slice, cell electrophysiological recordings of neuron, brain slices during cell, preparation
Abstract
Hnasko lab- preparation of Recording ACSF
Recording ACSF is used for incubating brain slices during cell-attached or whole-cell electrophysiological recordings of neurons.
Materials
NaCl (Fisher Scientific, cat# BP358)
KCl (Fisher Scientific, cat# BP366)
NaH2PO4 (Fisher Scientific, cat# BP329)
D-glucose (Sigma Aldrich, cat# G8270)
CaCl2 (Fisher Scientific, cat# BP510)
MgSO4 (Fisher Scientific, cat# M80)
NaHCO3 (Fisher Scientific, cat# BP328)
HCl (Fisher Scientific, cat# A481-212)
Prepare 10X stock solution.
Composition of 1 L of 10X Recording ACSF (in mM): 1250 NaCl, 25 KCl, 12 NaH2PO4, 125 d-glucose, 20 CaCl2 and 20 MgSO4.
Composition of 1 L of 10X Recording ACSF (in g): 73.05 NaCl, 1.86 KCl, 1.44 NaH2PO4, 22.52 d-glucose, 2.94 CaCl2 and 4.93 MgSO4.
Dissolve all salts in 1 L of ddH2O to make 10X stock solution of Recording ACSF.
Dilute 10X solution to 1X for use in experiments.
Dilute 100 mL of 10X solution to ~ 800 mL with ddH2O and add (in mM): 26 NaHCO3; (in g): 2.18 NaHCO3.
Add ddH2O to final volume of 1 L .
Bubble the solution with carbogen (95% O2 5% CO2) for ~10 min.
After bubbling, measure and adjust pH of solution to ~ 7.3 with 12 N HCl (<1 ml).
Refrigerate until use.